Contents Of The Manual - Okuma OSP-U100M Operation Manual

4203-E P-3
SECTION
1 FOREWORD
[CONTENTS OF THE MANUAL]
The manual consists of the following chapters.
I
SPECIFICATIONS
This Chapter describes the table of specifications and the operation flow block diagrams of OSP.
II OPERATION
This Chapter gives explanation on the following items.
Functions of NC
operation panel, machine information display, machine operation methods in
manual, MDI, and automatic modes, and other
operation functions
III DATA OPERATION
This Chapter gives explanation on the following items.
Program operation method, setting methods of zero offset data and tool offset data, data
input/output method, and file editing method
IV PARAMETER
This Chapter describes
the contents and setting procedure of the parameters used by the NC.
V APPENDIX
This Chapter gives
external views showing the arrangement of switches and indicating lamps of NC
operation panels.