Hour Meter (Option) - Okuma OSP-U100M Operation Manual

4203-E P-113
SECTION 5 AUTOMATIC MODE OPERATION
24. Hour Meter (Option)
POWER ON TIME
24-1
.
POWER
ON
TIME Hour Meter
The hour
meter
accumulates length of time in which operation power
has been turned on.
Hour meter range: 0
to 99999.9
hours
jj|773T
HE
HOURMETER
24-2.
NC RUNNING TIME Hour Meter
NO RUNNING TIME
The hour meter accumulates length of
time in
which the RUN lamp in
the NC
operation
panel
status
indicating lamps has been lit.
Hour
meter
range:
0 to 9999.9 hours
The hour
meter
is provided
with
the RESET button.
O
RESET
LIE
0 12 3 4
HOURMETER
24-3. CUTTING TIME Hour Meter
CUTTING TIME
The hour
meter
accumulates length of
time in which cutting has been
conducted (G01, G02 or G03 mode) in
the automatic or MDI
operations.
Hour meter range: 0
to
9999.9 hours
The
hour meter is provided with the RESET button.
O
RESET
ll°
1
HOURMETER
24-4.
SPINDLE REVOLUTION TIME Hour Meter
SPINDLE
REVOLUTION TIME The hour meter accumulates length of time in which the spindle has
been rotating
(CW or
CCW) disregarding the operation mode.
Hour meter range:
0 to 9999.9 hours
The hour meter is
provided with the RESET button.
O
RESET
m
E
12 3 4
HOURMETER
[Supplement]
When hour meters are selected, 24-1. "POWER ON TIME Hour Meter" and 24-2. "NC
RUNNING TIME Hour Meter" are usually equipped.