One Character Deletion - Okuma OSP-U100M Operation Manual

4203- E P-225
SECTION 2 PROGRAM OPERATION
5-6. One Character Deletion
(1) This function deletes a character located by the edit
pointer.
Press function key [F4] (CHAR.
DELETE) to delete the character located by the edit pointer.
(2) When the character is deleted, characters following the deleted one shift to the left.
(3) One character deletion operation at the line which has more than 63 characters
differs from
ordinary one character deletion processing. (See the figure.)
§800
» N101 GOO Y200
Z20
&0
T
>DC
CHAR. CHAR.
INSERT
|
DELETE
I
DELETE
|
ERASE
LINE LINE
INSERT DELETE
LINE EDIT
[EXTEND]ÿ/
QUIT
©©©CfjD©©©©
Press [F4] (CHAR. DELETE).
i
»
N101 GOO
800 Y200 Z200
(4)
The position of the edit pointer remains unchanged.
(5)
The prompt ">DC" will be displayed on the command line.