Run Guide Display; Running File Display - Okuma OSP-U100M Operation Manual

4203-E P-147
SECTION 6 DISPLAY ON NC OPERATION PANEL
8.
Run Guide Display
After selecting the EDIT AUXmode, press function
key [F7] (RUN GUIDE), and the RUN GUIDE screen
is
displayed.
(1) RUNNING FILE
The operation status of the file
currently selected is displayed at the left half
area on the screen.
I
PROGRAM OPERATION
RUN GUIDE
197/07/15
14:10:00
ROFTTTLE
RUNNING FILE SELECT ER
(a) MANUAL SELECT MODE
MAIN FILE NAME
TST9.MIN
MAIN PROGRAM NAME
0TST9
MAIN FILE NAME
EfcPTY
MAIN PROGRAM NAME
EMPTY
SUB FILE NAME
EMPTY
SELECT RUNNING METHOD
RUNNING (b)
(C)
RUNNING METHOD
A-Mtd
(d)
(e)
=EX
=GD
RUN
TIME INIT DELETE RENAME
GUIDE
[EXTEND]
J
Fig.
6-32
Running File Display
(a) File selection method
This field indicates how the file has been selected and is being operated.
Display
Contents
EXTERNAL SELECT MODE Operation by external program selection command
SCHEDULE MODE Scheduled program operation
MANUAL SELECT MODE
Operation by manual program selection
(b) MAIN FILE NAME
This field indicates the main file name currently selected.
(c) MAIN PROGRAM NAME
This field indicates the
main file program name currently selected.