Insert Mode - Okuma OSP-U100M Operation Manual

4203-E P-243
SECTION
2
PROGRAM OPERATION
(d) When the WRITE key is pressed while a line
other than
the bottom line is designated as the
edit line, the edit line is moved to the subsequent line and the edit pointer is moved to the
beginning of that line. This also applies to the
insert mode.
(e) When the program cannot be displayed in one page (16 lines), press the page key
(tg)
.
To return the display to the previous page, press the page key
(3B)
.
5-13. Insert Mode
In the insert mode
(I
mode), keyed in characters are added
to
the data in the displayed file. For the input on
the screen, page mode (P mode) is also provided in which keyed in characters, etc. overwrites the existing
characters. For details of the page mode, refer
to 5-1 2. "Page Mode".
The operating procedure is as indicated
below.
(1)
Press function key [F7] (INSERT MODE) "I MODE" will be displayed on the
1st
line of the
screen.
"I MODE" is displayed.
I
PROG
OPERATION"
EDIT
i
MODE WHEEL 100.
MIN
197/07/15
14:10:00
>>01000
N100 GOO
N101 G56
N103 G41G01
N104 G03
X300
$250
Y300
Z-55
M09 M03
F100 D11
Y200
X400
X500 Y300 10
J100
XI
00 Y300 1-200 JO
1100 JO
N105
IK) 06
X200 Y200
N107 G01
N108 G40
N109 GOO
X400
Y200 X300
Z100
MHO
N111
=E WHEEL100.MIN
f i le end
>
>EX
PAGE INSERT
FIND
CHANGE
COPY
MOVE EXTRACT MODE MODE
[EXTENDÿ/
FI
F2 ]
F3
F4
]
F5 F6 F7
)
F8
Press [F7] (INSERT MODE).
(a) Each time a character is keyed in in the insert mode, it is inserted before the edit pointer and
the character-strings following the edit pointer are shifted by one character. When data
is
inserted successively and the currently displayed data has reached the right end, data is
inserted in the next line that is preceded by
These lines are processed as one line.
(b) Each page has a total of
16
lines for edit operation.
When the WRITE key is pressed while the bottom line is designated as the edit line, 16 lines of data
are shifted by
one line each
and a blank line is created
on the
16th line. The edit line does not
change and the edit pointer is placed at the beginning of that line.