Dir (Directory) - Okuma OSP-U100M Operation Manual

4203-E P-307
SECTION
3
DATA INPUT/OUTPUT OPERATION
1-4. DIR (directory)
This function is used
to
display a list of the files and directories saved in an MS-DOS format floppy disk
(FDO:).
The operating procedure is indicated below.
(1) Press function key [F1] (DIR).
"Dl" is displayed on the command line.
=MSDS
,>DI
COPY
RENAME DELETE FREE
PROTECT
QUIT
DIR
\
Press [F1]
(DIR).
"Dl" is displayed.
(2)
Enter the device name following ">DI" for the device which
stores the files.
Example 1 : The following command displays all the directory names and file names
in the
MS-DOS format floppy disk designated as device "FDO:".
>D1 FDO:
Example 2: The following command displays all the directory names and file names
in
the-
directory "PATH" of the disk designated as device "FDO:".
>DI FD0:PATH (or alternatively, >DI FD0:\PATH)
Example 3: The following command displays all the directory names and file names under the
directory "PATH1
" which is
under the directory "PATH" of
the disk designated as
device "FDO:".
>DI FDO: PATH\PATH
1
Example
4:
The following command format displays all the directory names and file names that
start
with the character string "FO" in the directory "PATH" of the disk designated as
device "FDO:".
>DI FDO:PATH\FO*
(3) Press the WRITE key.
WRITE