Data Arrangement In Memory - Okuma OSP-U100M Operation Manual

4203-E P-266
SECTION
2
PROGRAM OPERATION
8.
Data Arrangement in Memory
When the program stored in the memory is edited repeatedly, the
unusable area in the memory will
increase. This decreases the available capacity of the memory and restricts the number of programs
to be
stored.
This function is used
to
arrange data
in
the memory so that it can be used effectively.
The operating procedure is as indicated below.
(1)
Press function key [F7] (CONDENS).
"=CO" is displayed on the console line.
=C0
MULTI
EDIT
PIP
DATE DIR PIP
LIST
CONDENS [EXTENDjy
©©©©©©©©
Press [F7]
(CONDENS).
"=CO- is displayed.
(2)
Press the WRITE key.
Arrangement of data in the memory will start.
After the completion of arrangement, the prompt "=" will appear on the command line.