Machining Management Function (Macman) - Okuma OSP-U100M Operation Manual

4203-E P-9
SECTION
1
FOREWORD
(7) Machining Management Function (MacMan)
•
: Standard
O : Optional
x
: Selection impossible
OSP OSP
Item Description
U10M
U100M
Collection and display
of machining
management
information
Machining report Collects and displays
the operation
progress
state
for the selected main programs.
Operation
report
Collects and displays the machine operating state
(power
on
time, cutting time, etc.) of the machine.
Operation history Collects and displays the machine
operation state
in time chart in intervals of 10 minutes.
Trouble information
Collects and displays the status of CNC and
operation history at the occurrence of an alarm.
Output of machining
management
information
Outputs the machining
management
information
(machining report, operation
report, operation
history, and trouble information) to floppy disk or
printer.
For OSP-U10, floppy disk input/output function
must
be selected separately.
Network function
* Detailed technical
consultation is
necessary.
Allows input/output of the machining
management
information (machining report, operation report,
operation history, and trouble information) through
the network (DNC-Pl/P2/P3yT1/T2yT3).
The DNC connection function
must
be selected
separately.
O
o