Notes On Creating And Editing Commands; Maximum Command Length - Okuma OSP-U100M Operation Manual

4203-E P-288
SECTION
2
PROGRAM OPERATION
(2) BS Key (Backspace Key)
Use of this key deletes a single character
to
the left of the edit pointer and causes the character
string that starts at the position of the edit pointer to
move one place
to
the left to close the space.
In the example shown below the character "A" to the left of the edit pointer is deleted and the
character string "PROGRAM. MIN" that starts at the position of the edit pointer shifts
one place to
the left.
CO FDOAgPROGRAM.MINl
\
EDIT POINTER
BS
O
COPY
OVERWRITE
CO FDOflPROGRAM.il
IN
l
Fig. 2-10 Deleting Characters (BS Key)
15-2-5.
Notes on Creating and Editing Commands
(1) Maximum Command Length
The downward-pointing arrow symbol signifies the end of
the command and the maximum
command length of 255 characters is reached when
this symbol is
at
the right end of the seventh
line.
When
the "insert" editing mode is effective,
it is not possible to key in a character at any position
when this limit has been reached.