Schedule Program Selection And Operation - Okuma OSP-U100M Operation Manual

4203-E P-84
SECTION
5
AUTOMATIC MODE OPERATION
2.
Schedule Program Selection and Operation
(1)
The schedule program function
is provided to continuously machine different types of
workpieces automatically using the pallet changer, etc. without operator's intervention.
In this item, selection and operation of the schedule program are explained.
For the programming of the schedule program, refer to Section
12, 3.
"Schedule Programs" in
Programming
Manual.
(2) For the selection of a schedule program, the directory-selection-based file operation screen is
used.
The following explanation gives basic information
on selection and registration of the schedule
program.
In addition
to
the basic information given below, there are various functions including the
function
to
display the registered
part
program files in batch. For details of the functions, refer to III.
DATA OPERATION, Section
2, 15.
"Directory-Selection-Based File Operation Function".
2-1
.
Selection and Operation
of
Schedule Program
(1 )
Press the AUTO key.
lA
U
T
QJ
(2)
The lamp at the upper left corner
in
the key lights and the screen changes
to
the
automatic
operation screen.
(3) Press function key [F8] (EXTEND)
two times.
(4) Press function key [F4] (SP SELECT).
=EX
=EX
NUMBER
SEARCI- RESTART
NUMBER SP SP-NO.
STOP SELECT SEARCH
NEW SP
ENTRY
[EXTEND]
J
FI
I
(
F2
1 [
F3
1
F4
] (
F5
I [
F6
) |
F7
] [
F8
Press [F4] (SP SELECT).