Outline Of Controls On Operation Panel; Operation Mode Selection Keys; Data Setting Mode Selection Keys - Okuma OSP-U100M Operation Manual

4203-E P-37
SECTION 1 OPERATION
2.
Outline of Controls on Operation Panel
2-1
.
Operation Mode Selection Keys
(1) AUTO Key
Select the automatic mode
to operate
the machine using
part
programs
stored in the memory disk (MD)
. For the execution of
a
part
program, it is
read
out to
the IC memory from the memory disk.
(2) MDI Key
Select the MDI mode
to operate the machine using a program, input from
the keyboard, in the same manner as in the automatic mode. In the MDI,
mode a program is input and executed in units blocks.
(3) MANUAL Key
Select the manual mode to operate the machine using the manual
operation
switches
provided in
the machine operation panel, the pulse
handle operation box. and other operation panels.
lAUTQj
!>
MD I
ft
MANUAL
2-2.
Data Setting Mode Selection Keys
(1)
EDIT AUX Key
Select the EDIT AUX (program operation) mode to read, edit, punch, or
print a part program,
to operate the tape reader, or to manage files.
(2) PARAMETER Key
Select the parameter mode
to set the parameters (system parameters,
user parameters, common variables, NC optional parameters, machine
system parameters, machine
user
parameters, etc.)
(3) ZERO SET Key
Select the zero set mode to set the
zero
offset data.
2>
.EDIT
AUX
<e>
[PARAMETER,
J—
H
.ZERO SET
(4)
TOOL DATA
Select the tool data set mode
to set
the tool length offset data, tool
diameter compensation data, ATC related tool data, tool management
data, etc.
(5) MacMan
Press the [MacMan] key to use the MacMan (machining
management
function).
ru
[TOOL
DATA,
MacMan