Library Program Registration - Okuma OSP-U100M Operation Manual

4203-E P-109
SECTION 5 AUTOMATIC MODE OPERATION
18.
Library Program Registration
This is the function necessary for executing such items
as a subprogram and a G code macro
through the
MDI operation or
for operating the program which contains subprogram call commands in the large
capacity mode operation after specifying the
S option. That is, the registration of subprograms is possible
with this library program registration function.
Such
a
registration is usually made when the PROGRAM
SELECT function key is pressed.
The operating
procedure is shown below:
(1) Press AUTO.
J
I
K
||
L
||
M
||
N
||
3*
L1JL!
CD
OT ©©©©
uj
®O©0 n
(ggr©nÿrwimnÿn*ir?rirF8i[Ej
7
(2) Press function key [F8] (EXTEND).
(3) Press function key [F1] (LIBRARY P.SET).
Fig. 5-11 Registering Library Programs
(1) Press the AUTO key.
(2) Press function key [F8] (EXTEND).
The function messages will change as
shown above. (The message "LIBRARY P.SET" appears
above F1 .)
(3)
Press function key [F1] (LIBRARY P.SET).
"LP"
is displayed on the 21st line
on
the display screen.