Edit Line Shifting - Okuma OSP-U100M Operation Manual

4203-E P-232
SECTION
2
PROGRAM OPERATION
(2) Edit Line Shifting
Example; When the 4th block is specified in the following program
(a) This function shifts the edit line by a specified number of
lines.
(b) The edit pointer is placed at the first
character of that line.
(c) On the display screen, the display changes so that the edit line is
located on the first line of the
screen.
(d) When the specified number is larger than the last line of the file, the edit
pointer is placed in
the line
next to the last line. In this case, two lines from the last line are displayed on
the
screen, followed by the following message on the command line.
file end
(e) When a
negative number is specified, the edit line shifts backward and the edit
pointer
is
placed
at
the first character of the specified line.
(f) When a negative number exceeding
the
first line of the file is specified, the edit pointer is
placed at the beginning of the file. The message "beginning of file" will be displayed on the
command line.
0800
X250
»
N101
N102
N103
N104
N105
N106
N107
GOO Z200
G01
Z150 F0.3
X300
X310
X200
GOO
Z200
G01
Z100
T
>F 4
PAGE INSERT
CHANGE COPY MOVE
[EXTENDI/
FIND EXTRACT
MODE MODE
Gp©©©©©©©
l
Press [F1] (FIND).
Key in "4" through the keyboard.
4
s>
Press the WRITE
key.
WRITE
»
[N}|05
N106
N107
GOO X310
X200
Z200
G01 Z100