Program Operation; List Of Program Commands - Okuma OSP-U100M Operation Manual

4203-E P-182
SECTION
2
PROGRAM OPERATION
SECTION
2
PROGRAM OPERATION
This section describes the program
operation procedure and the contents of the commands used in the
program
operation.
The NC unit has commands for DATE
entry, initializing, program deletion, etc. in addition to reading in and
punching-put of a program
tape and program editing.
In this system the file names can also be interchanged as individual programs are
assigned afile name for
managing the programs.
List of Program Commands
1.
Item Command Functions Remarks
Date
DATE Sets the date.
Directory
DIR Displays file directory.
Transfer
*
PIP
Transfers program file. Sub commands provided
Edit
*
(Supplement 1)
EDIT Edits program file. Sub commands provided
Multi-file transfer MPIP Transfers multiple files between
the NC and
an external
device
using the RS232C interface.
Sub commands provided
LIST
Lists file
contents.
List
*
CONDENS Arrangement Arranges the stored data.
Time
TIME Sets the time.
Initializing INIT Initializes the memory, floppy
disks and other data storage de¬
vices.
Deletion
*
DELETE Deletes the specified file.
Operation guide
(Supplement 2)
GD Displays the operation
state
of
the selected file.
Free area FREE Displays the free
area
in the
memory.
RENAME Renaming
*
Changes the specified file name.
File protection
*
PROTECT Prohibits writing
to
or renewing of
the specified file.
_
MS-DOS
*
MSDS Transfers the program files in the
MS-DOS format.
Sub commands provided