Signaling Security Event Log And Traps; Signaling Security Traps Management; Enabling/Disabling Signaling Security Related Snmp Traps; Displaying Event Logs - Avaya M770 User Manual

Signaling Security Event Log and Traps

The Signaling Security feature keeps track of access control violation attempts.
Every time a call setup is being rejected due to access control violation an event is
logged. Up to 100 most recent events are logged (i.e. if the log is full and a call is
being rejected an event will be logged and the oldest event will be removed).
Note: Access control violation events are not saved in a non-volatile memory.

Signaling Security Traps Management

The switch can either send or not send SNMP traps to the NMS in case access
control violation attempt occurs. The SNMP trap contains information about the
violation attempt.

Enabling/Disabling Signaling Security related SNMP traps:

Command:
Command:

Displaying event logs

Command:
Output
Avaya M770 ATM Switch User's Guide
Chapter 20
M15-155s8:/> vport sig sigsecurity traps enable
M15-155s8:/> vport sig sigsecurity traps disable
M15-155s8:/> vport sig sigsecurity event show
vport: 9.13.0
direction: outgoing
srcnsap:
39.02.02.00.00.00.00.00.00.00.00.00.00.00.00.f6.00.01.3c.82
dstnsap:
39.00.00.00.00.00.00.00.40.0d.87.00.2c.00.40.0d.87.00.2c.82
filter priority:255
template: Base
ruletime: 08:42:02 01 Jun 2000 GMT
-------------------
vport: 9.1.0
direction: incoming
srcnsap:
39.00.00.00.00.00.00.00.40.0d.87.00.2c.00.40.0d.64.03.ea.81
dstnsap:
39.01.01.00.00.00.00.00.00.00.00.00.00.00.40.0d.87.00.4e.86
filter priority:10
template: block-1
time: 00:00:49 01 Jan 1970 GMT
Signaling Security (Access Control) Commands
257