Chapter 16
Hardware Requirements
Configuring IPX Routing Globally
Web Agent
Procedure
16-4
To configure your switch as an IPX router, your Avaya P580 or P882
Multiservice switch must be configured with the following hardware:
Layer 3 50-series media modules.
80-Series Supervisor Modules
80-Series Licensed Layer 3 media modules
You can configure IPX routing globally using the Web Agent or the CLI.
To Enable or Disable IPX routing globally using the Web Agent:
1. In the navigation pane, expand the Routing > IPX > Configuration
folders and then click Global Configuration.
The IPX Global Configuration Web page is displayed in the content
pane. See
Figure
16-2.
Figure 16-2. IPX Global Configuration Web Page
2. Configure IPX Routing Global Configuration Web page parameters to
make your switch an IPX router. See
the Web page parameters.
3. Click APPLY to save your changes, or CANCEL to restore previous
settings.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Table 16-2
for an explanation of