Common procedures, command mode basics
Privileged EXEC mode
About this task
The Privileged EXEC command mode prompt appears as: ERS5000#.
Procedure
1. To enter the Privileged EXEC command mode from User Executive mode, enter
2. To exit the Privileged EXEC command mode, enter the exit command.
3. The exit the ACLI completely, enter the logout command.
Global Configuration mode
About this task
The Global Configuration command mode prompt appears as: ERS5000(config)#.
Procedure
1. To enter the Global Configuration command mode, from the Privileged EXEC mode,
2. To return to Privileged Exec mode, type exit.
3. The completely exit the ACLI, type logout.
Interface Configuration mode
About this task
The Interface Configuration mode command prompt appears as: ERS5000(config-if)#.
Procedure
1. Entrance to this command mode depends on the type of interface you want to
220
Troubleshooting
the enable command.
type configure.
configure.
Comments? infodev@avaya.com
December 2013