Connect To Or Disconnect From Device - Extron electronics XMP 240 C AT User Manual

3.
4.

Connect to or Disconnect from Device

When DSP Configurator is in Emulate mode, this selection in the
Connect to Device
When DSP Configurator is in Live mode and connected to a device, this selection reads
Disconnect from Device
selected, and returns to Emulate mode.
For detailed instructions on connecting to a XMP 240 C AT, see
XMP 240 C AT in Live Mode
from an XMP, see
Press .
<Enter>
Click and drag devices over the folder name and release to insert the devices into a
folder ( ).
3
Figure 105. Arranging Devices Into a Folder
and opens the
and disconnects DSP Configurator from the current device when
on page 17. For detailed instructions on disconnecting
Exit Live Mode and Enter Emulate Mode
dialog box when selected.
Connect to device...
XMP 240 C AT • Configuration Tools
menu reads
Tools
Connect to a
on page 19.
78