Table of Contents
Advertisement
Device Menu
The Device menu (see the image on the right) allows the user to:
Disconnect the device from PCS.
1
Open the
2
Communication
Reset Device to factory default.
3
Update Firmware.
4
View the SSP-200 Help file.
5
View information About this Module.
6
Reset Device
This function resets all device settings to factory defaults with or without retaining the TCP/
IP settings.
To reset the device:
From the drop‑down Device list, select Reset Device....A dialog box opens (see
1.
figure 52).
2.
Select from the three reset options shown in the figure.
3.
Click Reset to perform the reset or Close to cancel the operation.
Figure 52.
Hardware Settings
or
Settings.
Reset Device
SSP 200 • Product Configuration Software
57
Advertisement
Table of Contents
