Input Pre-Mixer Gain Block - Extron electronics XMP 240 C AT User Manual

Cancel Button — Reverts any changes made to the contained parameters back to
£
their states when the
Automix Help Button — Opens the
¤
further assistance in configuring the automix processor.
Automixer Gate Monitoring
Automixer gate monitoring allows the user to track when an automixer gate opens or
closes. This feature can be enabled by checking the
dialog (figure
for a channel, an unsolicited message is sent when the gate has opened or closed. The
response will include the Automixer OID, gate open or closed status, and the signal level
immediately after the status has changed (see
for SIS response syntax).
Comparing the automixer gate threshold setting to the gate status in the response will
indicate whether the automixer gate has opened or closed. When the gate status in the
response is
is less than

Input Pre-Mixer Gain Block

Double-click the pre-mixer
Figure 62.
The
Pre-mixer Gain
after input processing occurs and before it is sent to the mix matrix.
Figure 63.
Input Name — This name changes to match the default or user defined input name.
1
dialog box was opened and closes the dialog box.
Automix
61, on the previous page). When automixer gate monitoring is enabled
7
or greater, the gate has opened, and when the gate status in the response
1024
, the gate has closed.
1024
block to open the
Gain
Input Pre-mixer Gain Block
dialog box provides controls to boost, attenuate, and mute the signal
Input Name
1
Pre-mixer Gain Fader
2
Pre-mixer Gain Text Box
3
Mute Button
4
OK Button
5
Cancel Button
6
Pre-mixer Gain Help Button
7
Input Pre-mixer Gain Dialog Box
topic of the DSP Configurator Help file for
Automix
checkbox in an
Monitor Gate
Automixer Gate Monitoring
dialog box.
Pre-mixer Gain
XMP 240 C AT • DSP Configurator Software
Automix
on page 125
40