Mic/Line Inputs; Renaming At Outputs; Mic/Line Gain Dialog Box - Extron electronics AXI 22 AT User Manual

Mic/Line Inputs

The AXI 22 AT has two mic/line inputs and two AT outputs and the AXI 44 AT has four
mic/line inputs and four AT outputs. The AXI mic/line inputs feed the AT outputs which
transmit signal to the Dante network and appear on the Dante network as Transmitter
channels.

Renaming AT Outputs

AT Output names are read from the Dante transmitter channel labels and cannot be
changed in DSP Configurator. To change an AT Output name, rename the Transmitter label
in Dante Controller (see
NOTE: DSP Configurator continues to display default AT Output names even after
TIP:

Mic/Line Gain Dialog Box

Double-click the input gain block (
input settings.
1
2
3
4
5
6
7
8
9
Renaming a Transmitter
Transmitter channel labels are changed in Dante Controller.
It is essential that Dante Transmitter labels be named before audio subscriptions
are established in Dante Controller (see
Existing subscriptions are removed when transmitter labels are renamed.
Input Name — This name remains as the default channel
name even if the channel is renamed in Dante Controller.
dBFS Meter — This meter displays the input signal level in
dBFS ranging from -60 dBFS to 0 dBFS. Once the signal
reaches or exceeds -1 dBFS (default) or the clip threshold
defined in the Options dialog box, the clip box located at the
top of the meter lights red. A numerical readout of the input
level is located below the meter.
Gain Fader — Click and drag the fader to provide up to
42 dB of gain in 3 dB steps. Click the fader once and press
the <Up Arrow> or <Down Arrow> keys to adjust the fader
in 3 dB steps. Press <Page Up> or <Page Down> on the
keyboard to adjust the fader in 9 dB steps.
Input Gain Text Box — Allows the user to enter a gain value
in 3 dB steps.
Mute Button — Mutes the signal at the input stage. When
the button is red, mute is engaged.
Phantom Power Checkbox — Applies 48 V phantom power
to the selected input for use with condenser microphones.
OK Button — Confirms changes made to the contained parameters and closes the
Mic/Line Gain dialog box.
Cancel Button — Reverts any changes made to the contained parameters back to
their states when the current instance of the Mic/Line Gain dialog box was opened
and closes the dialog box.
Mic/Line Gain Help Button — Opens the Mic/Line Input Gain topic of the
DSP Configurator Help file for further assistance in configuring input gain.
on page 23).
Renaming a Transmitter
) to open the Mic/Line Gain dialog box to configure
AXI 22 AT and AXI 44 AT • DSP Configurator Software
on page 23).
9
1
2
3
4
5
6
7 8
17