(Config: Intfc2 Gigabit Ethernet) Ingress Str; (Config: Intfc2 Gigabit Ethernet) Ingress Str Ip; (Config: Intfc2 Gigabit Ethernet) Ingress Str Ip Group; (Config: Intfc2 Gigabit Ethernet) Ingress Str Ip Source - Comtech EF Data CDM-710 Installation And Operation Manual

Broadcast satellite modem
Table of Contents

Advertisement

CDM-710 Broadcast Satellite Modem
Front Panel Operation
(CONFIG: Intfc2 Gigabit Ethernet) Ingress
Intfc2 Streams
IP Mode Pri Red Timeout
The top line indicates the active stream. On the bottom line, select IP, Mode, Pri, Red, or
Timeout using the ◄ ► arrow keys, then press
(CONFIG: Intfc2 Gigabit Ethernet) Ingress
Intfc2 Multicast Streams
1
Select 1, 2, or Port using the ◄ ► arrow keys, then press
(CONFIG: Intfc2 Gigabit Ethernet) Ingress
Where # is the selected stream (1 or 2): Select Group or Source using the ◄ ►
arrow keys, then press
(CONFIG: Intfc2 Gigabit Ethernet) Ingress
(CONFIG: Intfc2 Gigabit Ethernet) Ingress
Act=1
2
Port
Intfc2 Address #
Group Source
ENTER
Intfc2 Multicast #
224.001.001.002
Where # is the selected stream (1 or 2): To enter the Group Multicast IP address
for the selected stream, first use the ◄ ► arrow keys to select the desired digit to
edit, then use the ▲ ▼ arrow keys to change the value of that digit. Press
when done.
ENTER
Intfc2 Source IP #
224.001.001.002
Where # is the selected stream (1 or 2): To enter the Source Multicast IP address
for the selected stream, first use the ◄ ► arrow keys to select the desired digit to
edit, then use the ▲ ▼ arrow keys to change the value of that digit. Press
when done.
ENTER
Str
.
ENTER
Str
Str
.
Str
Str
5–31
Revision 11
MN/CDM710.IOM
IP
.
ENTER
IP
1,2
IP
1,2
Group
IP
1,2
Source

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CDM-710 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Cdm-710l

Table of Contents