Edit The User Id; Edit The Access Group; Edit The Authentication Password - Comtech EF Data DMD-2050E Installation And Operation Manual

DMD2050E Universal Satellite Modem
IMPORTANT
All entries are case-sensitive.
To set up a User Account, do these steps:

1. Edit the User ID.

2. Edit the Access Group.

3. Edit the Authentication Password.

D.1.1 Edit the User ID.
1. Select the User ID.
2. Press ENTER.
3. Move the cursor to the first character.
4. Press CLEAR and theright button to delete the characters.
5. Use the direction buttons and numeric keys to enter the new User ID.
6. Press ENTER to save the change.
D.1.2 Edit the Access Group.
1. Select ACCESS GROUP.
2. Press ENTER.
3. Press the  down button until you see the new Access Group.
4. Press ENTER to save the change.
D.1.3 Edit the Authentication Password.
1. Select AUTH PASSWORD.
2. Press ENTER.
3. Move the cursor to the first character.
4. Press CLEAR and theright button to delete the characters.
5. Use the direction buttons and numeric keys to enter the new authentication password.
6. Press ENTER to save the change.
MN-DMD2050E Revision 2
Web Browser Setup Guide
D–4