Maintaining Class-Based Qos; Displaying The Flow-Based Traffic Statistics; Clearing The Flow-Based Traffic Statistics; Configuration Examples - Huawei S3700HI Configuration Manual - Qos

S3700HI Ethernet Switches
Configuration Guide - QoS

1.6 Maintaining Class-based QoS

If the traffic statistics function is enabled, you can view and clear the flow-based traffic statistics.

1.6.1 Displaying the Flow-based Traffic Statistics

You can use the display traffic policy statistics command to view the traffic statistics matching
the specified traffic classification rule.
Context
To view the flow-based traffic statistics, a traffic policy must exist and contain the traffic
statistics action.
Procedure
l
----End

1.6.2 Clearing the Flow-based Traffic Statistics

You can use the reset command to clear the flow-based traffic statistics.
Context
The flow-based traffic statistics cannot be restored after being cleared. Exercise caution when
you run the command.
Procedure
l
----End

1.7 Configuration Examples

This section provides several configuration examples of class-based QoS.
Issue 01 (2012-03-15)
Run the display traffic policy statistics { global [ slot slot-id ] | interface interface-type
interface-number | vlan vlan-id } { inbound | outbound } [ verbose { classifier-base |
rule-base } [ class classifier-name ] ] command to check the flow-based traffic statistics.
CAUTION
Run the reset traffic policy statistics { global [ slot slot-id ] | interface interface-type
interface-number | vlan vlan-id } { inbound | outbound } command in the user view to
clear the flow-based traffic statistics.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Class-based QoS Configuration
38