Table of Contents
Advertisement
Satellite Navigation
6. Select, for example, "Mode > High Order".
Figure 11-1: Spinal Dynamics: Understanding the displayed information (Mode > Higher Order
1 = Velocity at the start of the profile
2 = Period of time the velocity is held constant
3 = Period of time an acceleration is applied
4 = Maximum acceleration together with the acceleration period and, if set the initial velocity, defines
5 = Defines how fast the maximum acceleration is reached
6 = Profile's duration, calculated form the selected periods of constant speed and acceleration; the
7a = Maximum velocity = "Initial Velocity" + "Constant Acceleration Period"."Maximum Acceleration" =
7b = "Initial Velocity" - "Constant Acceleration Period"."Maximum Acceleration"
Signal dynamics settings are provided for testing the receiver sensitivity under
varying signal dynamics conditions. You can select a predefined or constant veloc-
ity profile, or define a user-specific one.
The displayed settings depend on the selected "Mode" and "Velocity Profile". Dedi-
cated plots visualize the variations of the velocity, acceleration and the jerk over
time.
Settings
Mode............................................................................................................................. 98
Inital
Inital Carrier
Velocity (Pseudorange
High-order profile
User Manual 1178.6379.02 ─ 01
and Velocity Profile = User Dynamics)
the maximum velocity (7a and 7b)
profile is repeated every 240 s.
500 m/s
Pseudorange........................................................................................................ 98
Phase....................................................................................................... 98
Rate)........................................................................................ 98
settings............................................................................................. 98
Tracking Mode
Signal Dynamics Settings
97
Advertisement
Chapters
Table of Contents
