System Errors Settings - R&S SMW-K44 User Manual

Satellite Navigation
Show Scaled Values
Switches between scaled and unscaled values representation.
Navigation message values are recalculated automatically.
Remote command:
[:SOURce<hw>]:BB:GNSS:SSValues

12.7 System Errors Settings

Access:
1. Select "Simulation Configuration > Satellites > GNSS system > SV# > SV Config >
Signals Configuration".
2. Select real navigation data as data source.
For example, for a GPS SV ID, select "Nav Msg Type > LNAV".
3. Select "Nav Msg Control > Edit".
4. Select "Nav Msg Content > Config > Additional Data".
Per default, the navigation message parameters are set to values, that correspond
to the values retrieved from the constellation data source.
Available navigation message parameters depend GNSS system and selected
navigation message type.
5. To simulate errors, change the values.
For example, set "User Range Accuracy Index (URA) = 12".
With this URA index, the selected SV is set to unvisible.
Changing any navigation message value leads to deviation between the simulated
and the broadcasted navigation message and thus to a deliberated error.
User Manual 1178.6379.02 ─ 01
Perturbations and Errors Simulation
System Errors Settings
on page 284
131