Marker Settings - R&S SMW-K44 User Manual

Satellite Navigation
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:TRIGger[:EXTernal]:INHibit <Inhibit>
Specifies the number of chips by which a restart is to be inhibited following an external
trigger event.
Parameters:
<Inhibit>
Example:
Manual operation:

19.18 Marker Settings

Example: Configure and enable standard marker signals
SOURce:BB:GNSS:TRIGger:OUTPut2:MODE?
// RESTart
SOURce:BB:GNSS:TRIGger:OUTPut2:FOFFset 10
SOURce:BB:GNSS:TRIGger:OUTPut2:ROFFset 20
SOURce:BB:GNSS:TRIGger:OUTPut3:DELay 16
[:SOURce<hw>]:BB:GNSS:TRIGger:OUTPut<ch>:MODE
[:SOURce<hw>]:BB:GNSS:TRIGger:OUTPut<ch>:ONTime
[:SOURce<hw>]:BB:GNSS:TRIGger:OUTPut<ch>:OFFTime
[:SOURce<hw>]:BB:GNSS:TRIGger:OUTPut<ch>:PATTern
[:SOURce<hw>]:BB:GNSS:TRIGger:OUTPut<ch>:PULSe:DIVider
[:SOURce<hw>]:BB:GNSS:TRIGger:OUTPut<ch>:PULSe:FREQuency?
[:SOURce<hw>]:BB:GNSS:TRIGger:OUTPut<ch>:PULSe:WIDTh
[:SOURce<hw>]:BB:GNSS:TRIGger:OUTPut<ch>:MODE <Mode>
Defines the signal for the selected marker output.
Parameters:
<Mode>
Example:
Manual operation:
User Manual 1178.6379.02 ─ 01
See Chapter 19.17, "Trigger
See "External Delay/Trigger Delay"
integer
Range: 0 to 67108863
*RST: 0
See Chapter 19.17, "Trigger
See "External Inhibit/Trigger Inhibit"
PULSe | PATTern | RATio | PPS | PP2S | TRIGger | DISabled |
RESTart | PPS10
*RST: PPS
See Chapter 19.17, "Trigger
See "Marker Mode" on page 201
Remote-Control Commands
Marker Settings
Settings", on page 382.
on page 199
Settings", on page 382.
on page 199
..................................................386
............................................... 387
..............................................387
...............................................387
......................................387
............................. 387
...................................... 388
Settings", on page 382.
386