R&S SMW-K44 User Manual page 229

Satellite navigation? gps, galileo, glonass, beidou, sbas/qzss, gnss extension, real word simulation, advanced mode
Table of Contents

Advertisement

Satellite Navigation
Parameters:
<Longitude>
<Latitude>
<Altitude>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:COORdinates:DMS:PZ
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:COORdinates:DMS[:
Defines the coordinates of the geographic location of the GNSS receiver in degrees,
minutes and seconds.
Parameters:
<LongitudeDeg>
<LongitudeMin>
<LongitudeSec>
<LongitudeDir>
User Manual 1178.6379.02 ─ 01
float
Range:
Increment: 1E-7
*RST:
float
Range:
Increment: 1E-7
*RST:
float
Altitude in meters above sea level.
Range:
Increment: 0.01
*RST:
See
Example "Static receiver"
See
"Location Coordinates, Position Format"
<LongitudeDeg>, <LongitudeMin>, <LongitudeSec>, <LongitudeDir>,
<LatitudeDeg>, <LatitudeMin>, <LatitudeSec>, <LatitudeDir>, <Altitude>
WGS] <LongitudeDeg>, <LongitudeMin>, <LongitudeSec>, <LongitudeDir>,
<LatitudeDeg>, <LatitudeMin>, <LatitudeSec>, <LatitudeDir>, <Altitude>
integer
Defines the longitude degrees.
Range:
*RST:
integer
Defines the longitude minutes.
Range:
*RST:
float
Defines the longitude seconds.
Range:
Increment: 1E-4
*RST:
EAST | WEST
Defines the longitude direction.
*RST:
Remote-Control Commands
Receiver Positioning Configuration Commands
-180 to 180
0
-90 to 90
0
-10E3 to 50E6
0
on page 225.
0 to 180
0
0 to 59
0
0 to 59.999
0
EAST
on page 44
229

Advertisement

Table of Contents
loading

Table of Contents