Signals And Power Configuration Per Satellite - R&S SMW-K44 User Manual

Satellite Navigation
[:SOURce<hw>]:BB:GNSS:SV:IMPort:QZSS:FILE:NMESsage <Filename>
[:SOURce<hw>]:BB:GNSS:SV:IMPort:GPS:FILE:NMESsage <Filename>
Selects the file from that the navigation data is extracted.
For overview of hte supported file types, see
Parameters:
<Filename>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:SV:IMPort:GALileo:EXECute
[:SOURce<hw>]:BB:GNSS:SV:IMPort:GLONass:EXECute
[:SOURce<hw>]:BB:GNSS:SV:IMPort:QZSS:EXECute
[:SOURce<hw>]:BB:GNSS:SV:IMPort:GPS:EXECute
Triggers the import of constellation and navigation data from the selected files.
Example:
Usage:
Manual operation:

19.10 Signals and Power Configuration per Satellite

Example: Configuring the SV power and modulation control settings
SOURce1:BB:GNSS:PRESet
SOURce1:BB:GNSS:TMODe NAV
// activate C/A and P codes in L1 band
SOURce1:BB:GNSS:SYSTem:GPS:SIGNal:L1Band:CA:STATe 1
SOURce1:BB:GNSS:SYSTem:GPS:SIGNal:L1Band:P:STATe 1
// activate GPS SVID#1
SOURce1:BB:GNSS:SVID1:GPS:STATe 1
SOURce1:BB:GNSS:SVID1:GPS:PRESent 1
// set power-related settings
SOURce1:BB:GNSS:POWer:REFerence -120
SOURce1:BB:GNSS:SVID1:GPS:POWer:PLOSs 1
SOURce1:BB:GNSS:SVID1:GPS:POWer:OFFSet -3
SOURce1:BB:GNSS:SVID1:GPS:SIGNal:L1Band:CA:POWer:OFFset 0
SOURce1:BB:GNSS:SVID1:GPS:SIGNal:L1Band:P:POWer:OFFset -3
// apply the settings to SVID#11
SOURce1:BB:GNSS:SVID1:GPS:POWer:COPY:SVID 11
SOURce1:BB:GNSS:SVID1:GPS:POWer:COPY:EXECute
User Manual 1178.6379.02 ─ 01
Signals and Power Configuration per Satellite
string
Filename, incl. file path and file extension.
See Example "Loading historical data"
See "NavMsg Source File"
See Example "Loading historical data"
Event
See "Import, Cancel" on page 193
Remote-Control Commands
Table 19-2.
on page 253.
on page 193
on page 253.
259