Sbas Settings; Error Correction Mode - R&S SMW-K44 User Manual

Satellite navigation? gps, galileo, glonass, beidou, sbas/qzss, gnss extension, real word simulation, advanced mode
Table of Contents

Advertisement

Satellite Navigation
3. Select "Error Correction Mode" > "Replay Historical Data and Sync Atmosphere
& SV Errors".
The SBAS corrections are configurable but the broadcast navigation message of
the GPS satellites cannot be edited. Atmospheric models and pseudorange param-
eters are retrieved from the SBAS corrections and cannot be edited, too.
The default SBAS corrections augment the default clock and orbit parameters of
the GPS satellites. If the simulated orbit and clock parameters are changed or
pseudorange errors are defined, the SBAS corrections have to be adjusted man-
ually.
4. Select "SBAS > SV ID > SV Config".
5. Select "Nav Msg Content > Config".

13.4 SBAS Settings

The SBAS settings are distributed among several dialogs, depending on their type.
The SBAS satellites settings, for example, are located in the similar dialogs as the set-
tings of the GPS satellites. You access this dialog on the same way as you access the
dialogs of the other GNSS systems.
Common settings are thus described in the corresponding sections; cross-references
are provided wherever needed. This section focuses on the settings that are dedicated
to SBAS.
For step-by-step description, see
on page 138.
The remote commands required to define these settings are described in
ter 19.11, "SBAS
Error Correction
GEO Ranging
Differential
Additional SBAS System

13.4.1 Error Correction Mode

Access:
1. Select "System Configuration > Systems&Signals > SBAS (e.g. EGNOS) > On".
2. Select "Satellites > SBAS".
User Manual 1178.6379.02 ─ 01
Chapter 13.3, "How to Generate SBAS
Corrections",
on page 272.
Mode...........................................................................................140
Information.....................................................................................142
Corretions........................................................................................... 147
Parameters................................................................... 159
SBAS Corrections
SBAS Settings
Corrections",
Chap-
140

Advertisement

Table of Contents
loading

Table of Contents