Accessing The Gnss Dialog; Scope - R&S SMW-K44 User Manual

Satellite Navigation
Installation
You can find detailed installation instructions in the delivery of the option or in the
R&S SMW Service Manual.

2.1 Accessing the GNSS Dialog

To open the dialog with GNSS settings
► In the block diagram of the R&S SMW, select "Baseband > Satellite Navigation".
A dialog box opens that displays the provided general settings.
The signal generation is not started immediately. To start signal generation with the
default settings, select "State > On".

2.2 Scope

Tasks (in manual or remote operation) that are also performed in the base unit in the
same way are not described here.
In particular, it includes:
●
Managing settings and data lists, like storing and loading settings, creating and
accessing data lists, or accessing files in a particular directory.
●
Information on regular trigger, marker and clock signals and filter settings, if appro-
priate.
●
General instrument configuration, such as checking the system configuration, con-
figuring networks and remote operation
●
Using the common status registers
For a description of such tasks, see the R&S SMW user manual.
User Manual 1178.6379.02 ─ 01
Welcome to the GNSS Satellite Navigation Options
Scope
13