Local And Global Connector Settings - R&S SMW-K44 User Manual

Satellite Navigation
Clock Source
Selects the clock source.
●
"Internal"
The instrument uses its internal clock reference.
●
"External Local Clock"
The instrument expects an external clock reference at the local T/M/C connector.
Remote command:
[:SOURce<hw>]:BB:GNSS:CLOCk:SOURce
Clock Mode
Sets the type of externally supplied clock.
Remote command:
[:SOURce<hw>]:BB:GNSS:CLOCk:MODE
Measured External Clock
Provided for permanent monitoring of the enabled and externally supplied clock signal.
Remote command:
CLOCk:INPut:FREQuency?

18.4 Local and Global Connector Settings

Each of the "Trigger In", "Marker" and "Clock" dialogs as well as the "Trigger Marker
Clock" dialog provides a quick access to the related local and global connector set-
tings.
For more information, refer to the description R&S SMW User Manual, section "Local
and Global Connectors".
User Manual 1178.6379.02 ─ 01
Signal Generation Control
Local and Global Connector Settings
on page 388
on page 388
203