R&S SMW-K44 User Manual page 251

Satellite Navigation
[:SOURce<hw>]:BB:GNSS:ATMospheric:IONospheric:NEQuick:UMSN <State>
Enables the instrument to use the measured sunspot number value.
Parameters:
<State>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:ATMospheric:IONospheric:MOPS:FILE <Filename>
Select an ionospheric grid file.
Parameters:
<Filename>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:ATMospheric:IONospheric:KLOBuchar:ALPHa<ch0>:
Sets the klobuchar parameters alpha_0 to alpha_3.
Suffix:
<ch0>
Parameters:
<AlphaUnscaled>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:ATMospheric:IONospheric:KLOBuchar:BETA<ch0>:
Sets the klobuchar parameters beta_0 to beta_3.
Suffix:
<ch0>
User Manual 1178.6379.02 ─ 01
0 | 1 | OFF | ON
*RST:
See Example "Configuring the ionospheric and troposphere
models"
See "NeQuick Parameters"
string
To load a predefined file, specify only the filename.
To load a used-defined file, specify the absolute file path with fil-
ename and extension (*.iono_grid)
See Example "Configuring the ionospheric and troposphere
models"
See "MOPS-DO-229D"
UNSCaled <AlphaUnscaled>
.
0 to 3
float
Range:
*RST:
See Example "Configuring the ionospheric and troposphere
models"
See "Klobuchar Parameters"
UNSCaled <BetaUnscaled>
.
0 to 3
0
on page 249
on page 110
on page 249
on page 110
dynamic
0
on page 249
on page 109
Remote-Control Commands
Atmospheric Configuration
251