R&S SMW-K44 User Manual page 264

Satellite Navigation
[:SOURce<hw>]:BB:GNSS:POWer:REFerence <ReferencePower>
Sets the power level that is used as a reference for the calculation of the power level of
the satellites.
Parameters:
<ReferencePower>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:POWer:PLOSs <PathLossState>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:POWer:PLOSs <PathLossState>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:POWer:PLOSs <PathLossState>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:POWer:PLOSs <PathLossState>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:POWer:PLOSs <PathLossState>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:POWer:PLOSs <PathLossState>
If enabled, the power of the SV ID signals is reduced to account for the free space
attenuation.
Parameters:
<PathLossState>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:POWer:OFFSet <PowerOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:POWer:OFFSet <PowerOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:POWer:OFFSet <PowerOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:POWer:OFFSet <PowerOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:POWer:OFFSet <PowerOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:POWer:OFFSet <PowerOffset>
Reduces the signal of the selected SV ID by the defined value.
Parameters:
<PowerOffset>
Example:
User Manual 1178.6379.02 ─ 01
Signals and Power Configuration per Satellite
float
Range: -145 to 20
Increment: 0.01
*RST: -30
See Example "Configuring the SV power and modulation control
settings" on page 259.
See "Ref. Power" on page 58
0 | 1 | OFF | ON
*RST: 0
See Example "Configuring the SV power and modulation control
settings" on page 259.
See "Add Power Path-Loss"
float
Range: -21 to 0
Increment: 0.01
*RST: 0
See Example "Configuring the SV power and modulation control
settings" on page 259.
Remote-Control Commands
on page 65
264