Table of Contents
Advertisement
Satellite Navigation
[:SOURce<hw>]:BB:GNSS:TIME:STARt:TIME <Hour>, <Minute>, <Second>
If the time base is UTC, sets the simulation start time in UTC time format.
Parameters:
<Hour>
<Minute>
<Second>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:TIME:STARt:WNUMber <Week>
If time base is GPS or GST, sets the week number (WN).
Parameters:
<Week>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:TIME:STARt:TOWeek <TOW>
If time base is GPS or GST, sets the simulation start time within week set with the
command [:SOURce<hw>]:BB:GNSS:TIME:STARt:WNUMber.
Parameters:
<TOW>
Example:
Manual operation:
User Manual 1178.6379.02 ─ 01
integer
Range:
0 to 23
integer
Range:
0 to 59
float
Range:
0 to 59.999
Increment: 0.001
See
Example "Configuring the time conversion and leap sec-
onds settings"
on page 214.
See
"Simulation Start"
integer
The weeks are numbered starting from a reference time point
(WN_REF=0), that depends on the navigation standard.
Range:
0 to 9999*53
*RST:
0
See
Example "Configuring the time conversion and leap sec-
onds settings"
on page 214.
See
"Simulation Start"
float
Number of seconds since the beginning of the week
Range:
0 to 604799.999
Increment: 0.001
*RST:
0
See
Example "Configuring the time conversion and leap sec-
onds settings"
on page 214.
See
"Simulation Start"
Remote-Control Commands
Time Conversion Configuration
on page 37
on page 37
on page 37
218
Advertisement
Chapters
Table of Contents
