R&S SMW-K44 User Manual page 174

Satellite Navigation
"Offline"
Remote command:
[:SOURce<hw>]:BB:GNSS:LOGGing:MODE
Generate,On/Off
Starts/stops data logging.
Note: Existing files with the same name are overwritten. If you store the logged data to
files, first check whether the selected folder
empty.
To prevent overwriting, set "Store in Subdirectories according Time > On".
"Generate"
"On"
"Off"
Remote command:
[:SOURce<hw>]:BB:GNSS:LOGGing:OFFLine:GENerate
[:SOURce<hw>]:BB:GNSS:LOGGing:OFFLine:ABORt
[:SOURce<hw>]:BB:GNSS:LOGGing:RT:STATe
Time Offset
In "Mode > Offline", delays the logging start.
The first logged point of time is defines as "Simulation Start Time" + "Time Offset" +
"Log Step".
Remote command:
[:SOURce<hw>]:BB:GNSS:LOGGing:OFFLine:TOFFset
Duration
In "Mode > Offline", sets the time span that is logged.
Remote command:
[:SOURce<hw>]:BB:GNSS:LOGGing:OFFLine:DURation
Directory
Access the standard "File Select" dialog and defines the storage place.
See also
Remote command:
[:SOURce<hw>]:BB:GNSS:LOGGing:DESTination:FILE:DIRectory
on page 376
Store in Subdirectories according Time
Creates subdirectories with time stamp and saves the logged files in them. Enable this
parameter to prevent that files are overwritten.
If logging is enabled, the file names of the created files and the folder structure are
indicated.
See also
User Manual 1178.6379.02 ─ 01
The logged navigation data is emulated.
Logging files are created and saved.
Logging is initialized and logging starts.
Logging files are saved.
"Filename syntax" on page 171.
"Filename syntax" on page 171.
Data Logging General Settings
on page 374
Store in Subdirectories according Time
on page 374
on page 374
on page 375
on page 375
on page 375
Data Logging
is
174