Satellite Navigation
7.2 Static Receiver
Access:
1. Select "GNSS > Simulation Configuration > Receiver".
2. Select "Positioning" > "Static".
3. Select "Positioning Configuration".
Settings
Location, Start
Reference
Location Coordinates, Position
Attitude Behaviour,
Attitude
Location, Start Location
Selects the geographic location of the GNSS receiver. Coordinates representation
depends on the selected "Reference Frame" and "Position Format".
"User Defined"
User Manual 1178.6379.02 ─ 01
Location................................................................................................ 42
Frame.......................................................................................................... 43
More...............................................................................................44
Cofiguration......................................................................................................45
└
Yaw/Heading, Pitch/Elevation, (Start)
└
Spinning
Rate................................................................................................. 46
Sets the receiver position in terms of "Latitude", "Longitude" and "Alti-
tude"
Format......................................................................... 44
Roll/Bank............................................ 45
Receiver Type and Position
Static Receiver
42