R&S SMW-K44 User Manual page 86

Satellite Navigation
10. Select "Display > Position" with "3D View > On" to observe the 3D positioning of
the three antennas.
11. Select "GNSS > General > State > On" to enable signal generation.
12. Select "Signal Monitor > Satellites > Sky View".
The display is updated in real time. You can observe how depending on the current
GNSS receiver position, the spinning rate and the current active antenna the
received GNSS signal changes.
13. Select "Satellites > Power View".
User Manual 1178.6379.02 ─ 01
Real-World Environment
How to Simulate Real-Word Effects
86