R&S SMW-K44 User Manual page 115

Satellite Navigation
6. Define the errors in the table.
For "Error Mode = Profile or Constant", a pseudorange error plot indicates the error
variation over time.
Settings
Error
Copy
Value........................................................................................................................... 116
Start Time
Profile
Error Mode
Defines how the pseudorange errors are specified:
"Constant"
"Profile"
"From SBAS"
Remote command:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:PRERrors:MODE
(etc. for the other GNSS systems)
User Manual 1178.6379.02 ─ 01
Mode.................................................................................................................. 115
to,SV-ID............................................................................................................. 116
Offset......................................................................................................... 116
Table................................................................................................................ 116
Applied is the constant pseudorange error set with the parameter
Value.
The pseudorange errors are defined in table form, see
on page 116.
If "Simulation Configuration > Satellites > SBAS > Error Correction
Mode > Real Historical data and Sync Atmosphere & SVs Errors",
pseudorange errors are extracted from the imported SBAS correction
flies.
All other pseudorange error modes are disabled.
Perturbations and Errors Simulation
Pseudorange Errors Settings
on page 295
"Profile Table"
115