Related Settings - R&S SMW-K44 User Manual

Satellite Navigation

14.1 Related Settings

This section lists only on the settings that are dedicated to the advanced mode. All
other settings are the same as for the standard mode. For description, see the corre-
sponding section.
Receiver > Number of
Monitor >
Monitor >
SV Selection Criteria > Reference
Receiver > Number of Vehicles
Option: R&S SMW-K120
(Access: "GNSS > Simulation Configuration > Receiver")
In "GNSS Advanced" mode, sets the number of simulated vehicles.
Further receiver settings, like position, antennas or environment effects apply for the
vehicle indicated on the side tab.
Remote command:
[:SOURce<hw>]:BB:GNSS:VEHicle:COUNt
Monitor > Vehicles
Option: R&S SMW-K120
(Access: "GNSS > Simulation Monitor")
In "GNSS Advanced" mode, selects the vehicle for that the displayed information
applies.
"V2" is enabled if
Monitor > Antennas
Option: R&S SMW-K120
(Access: "GNSS > Simulation Monitor")
In "GNSS Advanced" mode, selects the antenna for that the displayed information
applies.
User Manual 1178.6379.02 ─ 01
Multi-Band, Multi-Antenna and Multi-Vehicle Scenarios
Vehicles...................................................................................166
Vehicles.......................................................................................................166
Antennas..................................................................................................... 166
Receiver > Number of Vehicles
Vehicle..................................................................167
on page 381
= "2"
Related Settings
166