Satellite Navigation
Figure 9-2: Power settings: understanding the displayed information
1 = Decreases the SV signal power and thus the power of all signals of this SV. SV "Power Offset" is
2 = Boosts or decreases the power of the individual signal components. Power offsets are set relative to
Available power settings depend on the GNSS system and selected RF band.
For information on how these settings affect the SV power, see
(SV) power calculation"
10. To simulate multi-path effects:
For more information, see
a) Select "Simulation Configuration > Receiver > Environmental Model = Static
b) Select "Environmental Model"
c) Set for example: "Number of Echoes = 1", "Echo 1 > Init. Code Phase = 300
11. Select "GNSS > Monitor > Satellites > Power View" to observe the power levels of
all satellites at a glance.
User Manual 1178.6379.02 ─ 01
set relative to the
Ref. Power
the
Ref. Power
+ "Power Offset"
on page 61.
Multipath".
m", "Power Offset = -10 dB".
Chapter 10.8, "Static
Multipath",
Space Vehicle Configuration
Power Settings
"About satellite's
on page 92.
63