R&S SMW-K44 User Manual page 234

Satellite Navigation
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:DHEading
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:DELevation
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:DX
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:DY
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:DZ
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ANTenna:COUNt
Set the numer of anntenas to be simulated.
Parameters:
<NumberOfAntenna> integer
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ANTenna:DISPlay <AntennaView>
Select the antenna characteristics that are currently visualized.
Parameters:
<AntennaView>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ANTenna:V3D <Visualize3D>
Activates the interactive 3D representation of the body mask or the power/phase distri-
bution the antenna.
Parameters:
<Visualize3D>
Example:
Manual operation:
User Manual 1178.6379.02 ─ 01
<NumberOfAntenna>
Range:
*RST:
See Example "Selecting an antenna pattern and body mask file"
on page 233.
See "Simulation Configuration > Receiver > Number of Anten-
nas" on page 89
APOWer | APHase | BODY | POSition
*RST:
See Example "Selecting an antenna pattern and body mask file"
on page 233.
See "Display"
0 | 1 | OFF | ON
*RST:
See Example "Selecting an antenna pattern and body mask file"
on page 233.
See "3D View"
Remote-Control Commands
Antenna Pattern and Body Mask
..........................................236
.................................................... 236
.................................................... 236
.................................................... 236
1 to 4
1
APOWer
on page 89
0
on page 90
........................................236
234