Speed; Attitude; Power View > Signal Selection; Power View > Echoes - R&S SMW-K44 User Manual

Satellite Navigation
For static receivers, the value resumes the value of the parameter "Position Configura-
tion" >
For moving receivers, the receiver position specified as "Position Configuration" >
Location
from the waypoints file as function of the time.
Current position is indicated in the
Speed ← Real-time information
Indicates the speed of a moving receiver.
Applies for moving receivers with specified velocity value in the movement description
file.
Attitude ← Real-time information
Displays the receiver attitude parameters yaw/heading (Y), pitch/elevation (P), roll/
bank (R) in degrees.
The initial receiver attitude parameters are selected in the "Localization Data" dialog.
Power View > Signal Selection
Defines the signals to be visualized on the "Power View" graph.
Useful in hybrid configurations and for limiting the displayed information to, for exam-
ple, one GNSS system.
Power View > Echoes
If enabled, the "Power View" indicates also the echoes per SV.
Echoes are generated if static multipath with at least one echo is enabled, see
ter 10.8, "Static
See also
Map Viewer > Axis
Changes the axis type in the
User Manual 1178.6379.02 ─ 01
Location, Start LocationLocation.
is the initial location of the receiver. The current receiver's location is retrieved
Multipath", on page 92.
Figure 9-3.
Receiver > Map View
Receiver > Map View.
display.
Getting Started
Simulation Monitor
Start
Chap-
33