R&S SMW-K44 User Manual page 231

Satellite Navigation
Parameters:
<Roll>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ATTitude:SPIN:RATE <Rate>
Sets the constant rate of change of the roll.
Parameters:
<Rate>
Example:
Options:
Manual operation:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:WAYPoints:FILE
Selects a predefined or user-defined waypoint files to simulate a moving scenario.
Parameters:
<WayPoints>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:WAYPoints:ROMode
Defines the way the waypoint/attitude file is processed.
Parameters:
<RoMode>
Example:
Manual operation:
User Manual 1178.6379.02 ─ 01
float
Range:
Increment: 0.001
*RST:
See Example "Moving receiver"
See "Yaw/Heading, Pitch/Elevation, (Start) Roll/Bank"
on page 45
float
Range:
Increment: 0.01
*RST:
See Example "Moving receiver"
R&S SMW-K108
See "Spinning Rate"
<WayPoints>
Filename or complete file path incl. extension
Waypoint files have the extension *.txt, *.nmea, *.kml or
*.xtd.
See Example "Moving receiver"
See "Waypoints File"
<RoMode>
CYCLic | RTRip | OWAY
*RST:
See Example "Moving receiver"
See "Readout Mode"
Remote-Control Commands
Receiver Positioning Configuration Commands
-180 to 180
0
on page 226.
-400 to 400
0
on page 226.
on page 46
on page 226.
on page 47
OWAY
on page 226.
on page 47
231