R&S SMW-K44 User Manual page 90

Satellite Navigation
"Position"
"Body Mask"
"Antenna Pattern (Power), Antenna Pattern (Phase)"
Remote command:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ANTenna:DISPlay
3D View
Displays an interactive 3D representation of the body mask or the power/phase distri-
bution the antenna.
Remote command:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ANTenna:V3D
A x
Subsequent antenna number. It also selects the antenna whose pattern or body mask
is visualized.
Active
●
In "System Config > Mode > Standard", activates the antenna and thus defines
which antenna is simulated.
●
Option: R&S SMW-K120
In "System Config > Mode > GNSS Advanced", select "Stream# > A1" to define
which antenna is simulated by which stream.
Remote command:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:STATe
Body Mask, Antenna Pattern
Displays the selected body mask and antenna pattern files.
To change a file, select its filename.
You access the standard "Select Antenna Pattern File" dialog to select (or edit) the file,
describing the body mask or the antenna pattern (*.ant_pat and *.body_mask).
Several predefined antenna patterns are provided but you can load your own files
("User Files"), too.
The "Select Antenna Pattern File" displays both, a list of available files and the content
of the selected file.
Select "Edit" to open a graphical editor for changing the file content.
See:
●
Edit > Body Mask/Antenna Pattern File
●
Chapter A.3, "Antenna Pattern and Body Mask
User Manual 1178.6379.02 ─ 01
Two displays that visualize the antenna position relative to the center
of gravity (COG):
●
On the left, the top view - shows the x/y direction
●
On the right, the side view - shows the x/z direction
To change the antenna position, set the parameters "ΔX, ΔY, ΔZ".
Visual representation of the body mask retrieved from the selected
file ("Body Mask").
Visual representation of the ppower/phase distribution as retrieved
from the selected antenna pattern file ("Antenna Pattern").
Real-World Environment
Antenna Configuration Settings
on page 234
on page 236
Files", on page 401.
on page 234
90