R&S SMW-K44 User Manual page 89

Satellite Navigation
Try out also the following:
1. In the "Antenna Configuration" dialog, select "3D View > On".
2. Select "Display > Antenna Pattern (Power)/(Phase)" to visualize the power and
phase response.
3. Select "Display > Position" to visualize the antenna's orientation and location com-
pared to the center of gravity (COG).
Automotive applications
Extract the attitude parameters from the waypoint file as follows:
1. Select "Receiver > Position > Moving".
2. Select "Position Configuration > Attitude Behaviour > From Waypoint File".
Settings
Simulation Configuration > Receiver > Number of
Display.......................................................................................................................... 89
3D View.........................................................................................................................90
A x................................................................................................................................. 90
Active............................................................................................................................ 90
Body Mask, Antenna
Delta X, Delta Y, Delta
Delta Heading, Delta Elevation, Delta
Edit > Body Mask/Antenna Pattern
Simulation Configuration > Receiver > Number of Antennas
Defines the number of configurable antennas.
You can create a pool of up to four antenna and body masks and switch between
them. To define which antenna is simulated, set "A#" > Active.
Note: Switching between the active antenna restarts the simulation.
Remote command:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ANTenna:COUNt
Display
Select the antenna characteristics that are currently visualized.
If more than one antenna is enabled (e.g. "Receiver > Number of Antennas = 2"), the
displayed information corresponds to the currently selected one ("A# > Active > On").
The graph is merely a visualization. To change the values, select "A# > Filename >
Select Antenna Pattern File > Predefined/User Files" > "Edit".
User Manual 1178.6379.02 ─ 01
Pattern........................................................................................ 90
Z............................................................................................... 91
└ View Type....................................................................................................... 91
└ Azimuth, Elevation, Power Loss, Phase Response,
└ Save as........................................................................................................... 92
Antenna Configuration Settings
Antennas........................................89
Bank..................................................................91
File........................................................................ 91
Real-World Environment
Resolution..................... 92
on page 234
89