R&S SMW-K44 User Manual page 219

Satellite Navigation
[:SOURce<hw>]:BB:GNSS:TIME:CONVersion:LEAP:AUTO <AutoConfigure>
Enables the simulation of the leap second transition.
Parameters:
<AutoConfigure>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:TIME:CONVersion:LEAP:SEConds <LeapSeconds>
Sets the currently used leap second.
Parameters:
<LeapSeconds>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:TIME:CONVersion:LEAP:DATE <Year>, <Month>,
Defines the date of the next UTC time correction.
Parameters:
<Year>
<Month>
<Day>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:TIME:CONVersion:LEAP:SIGN <Sign>
Defines whether one second is added to or subtracted from the current leap second
value.
User Manual 1178.6379.02 ─ 01
0 | 1 | OFF | ON
*RST:
See Example "Configuring the time conversion and leap sec-
onds settings"
See "Auto Configure Leap Seconds"
integer
Range:
*RST:
See Example "Configuring the time conversion and leap sec-
onds settings"
See "Current Leap Seconds (Ref. 1980)"
<Day>
integer
Range:
integer
Range:
integer
Range:
See Example "Configuring the time conversion and leap sec-
onds settings"
See "Next Leap Second Date"
Remote-Control Commands
Time Conversion Configuration
1
on page 214.
0 to 50
16
on page 214.
1980 to 9999
1 to 12
1 to 31
on page 214.
on page 38
on page 37
on page 38
219