Simulated Clock Settings - R&S SMW-K44 User Manual

Satellite Navigation
Parameter
Rate of Right Ascension - Ω'
Mean Motion Difference - Δ
Orbit Perturbation ← QZSS SV
Comprises the navigation message parameters, specific to and common for all QZSS
satellites.
Parameter
Cosine Difference of Latitude - C
Sine Difference of Latitude - C
Cosine Difference of Orbital Radius - C
Sine Difference of Orbital Radius - C
Cosine Difference of Inclination - C
Sine Difference of Inclination - C

9.4 Simulated Clock Settings

Access:
1. Select "GNSS > Simulation Configuration > Satellites".
2. Select the GNSS system for that you want to configure satellites constellation, for
example GPS.
3. Select "SV# > SV Config".
4. In the "SV Configuration" dialog, select "Simulated Clock".
Available navigation message parameters depend on the GNSS system.
User Manual 1178.6379.02 ─ 01
Remote command:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:
SIMulated:ORBit:ODOT
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:
n
SIMulated:ORBit:NDELta
Remote command:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:
uc
SIMulated:ORBit:CUC
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:
us
SIMulated:ORBit:CUS
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:
rc
SIMulated:ORBit:CRC
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:
rs
SIMulated:ORBit:CRS
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:
ic
SIMulated:ORBit:CIC
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:
is
SIMulated:ORBit:CIS
Space Vehicle Configuration
Simulated Clock Settings
on page 289
on page 290
on page 290
on page 290
on page 291
on page 291
on page 291
on page 291
77