R&S SMW-K44 User Manual page 383

Satellite navigation? gps, galileo, glonass, beidou, sbas/qzss, gnss extension, real word simulation, advanced mode
Table of Contents

Advertisement

Satellite Navigation
[:SOURce<hw>]:BB:GNSS:TRIGger:EXTernal:SYNChronize:OUTPut
[:SOURce<hw>]:BB:GNSS:TRIGger:OUTPut<ch>:DELay
[:SOURce<hw>]:BB:GNSS:TRIGger:OBASeband:DELay
[:SOURce<hw>]:BB:GNSS:TRIGger:OBASeband:INHibit
[:SOURce<hw>]:BB:GNSS:TRIGger[:EXTernal]:DELay
[:SOURce<hw>]:BB:GNSS:TRIGger[:EXTernal]:INHibit
[:SOURce<hw>]:BB:GNSS[:TRIGger]:SEQuence <Sequence>
Selects the trigger mode.
Parameters:
<Sequence>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:TRIGger:SOURce <Source>
Selects the trigger signal source and determines the way the triggering is executed.
Provided are:
Internal triggering by a command (INTernal)
External trigger signal via one of the local or global connectors
Internal triggering by a signal from the other basebands (INTA|INTB)
OBASeband|BEXTernal|EXTernal: Setting only
Provided only for backward compatibility with other Rohde & Schwarz signal gener-
ators.
The R&S SMW accepts these values and maps them automatically as follows:
EXTernal = EGT1, BEXTernal = EGT2, OBASeband = INTA or INTB
(depending on the current baseband)
Parameters:
<Source>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:TRIGger:RMODe?
Queries the status of waveform output.
User Manual 1178.6379.02 ─ 01
AUTO | RETRigger | AAUTo | ARETrigger | SINGle
*RST:
See
Chapter 19.18, "Marker
See
"Trigger Mode"
EGT1|EGT2: External global trigger
EGC1|EGC2: External global clock
ELTRigger: External local trigger
ELCLock: External local clock
INTB | INTernal | OBASeband | EGT1 | EGT2 | EGC1 | EGC2 |
ELTRigger | INTA | ELCLock | BEXTernal | EXTernal | BBSY
*RST:
See
Chapter 19.18, "Marker
See
"Trigger Source"
Remote-Control Commands
..................................................385
...................................................385
...................................................385
..................................................... 385
..................................................... 386
AUTO
Settings",
on page 196
INTernal
Settings",
on page 197
Trigger Settings
.................................384
on page 386.
on page 386.
383

Advertisement

Table of Contents
loading

Table of Contents