Orbit And Orbit Perturbation Errors Settings - R&S SMW-K44 User Manual

Satellite Navigation
"Insert"
Remote command:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:PRERrors:PROFile<gr>:INSert
on page 300
(etc. for the other GNSS systems)
"Delete"
Remote command:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:PRERrors:PROFile<gr>:DELete
on page 300
(etc. for the other GNSS systems)
Remote command:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:PRERrors:PROFile:COUNt?
on page 298
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:PRERrors:PROFile:APPend
on page 298
(etc. for the other GNSS systems)

12.4 Orbit and Orbit Perturbation Errors Settings

Access:
1. Select "Simulation Configuration > Satellites".
2. Select the GNSS system for that you want simulate system errors, for example
GPS.
3. Select "SV# > SV Config > Signals Configuration".
4. Select real navigation data as data source.
For example, for a GPS SV ID, select "Nav Msg Type > LNAV".
5. Select "Nav Msg Control > Edit".
6. Select "Nav Msg Content > Config > Orbit".
Per default, the navigation message parameters are set to values, that correspond
to the values retrieved from the constellation data source.
User Manual 1178.6379.02 ─ 01
Inserts a row above the selected one.
Removes the selected row.
Perturbations and Errors Simulation
Orbit and Orbit Perturbation Errors Settings
117